- Internal Micrometer / Bore Gauge
- Concentricity Gage
- Bench Centre
- Digital Depth Gauge / Depth Caliper
- Digital Calipers
- Go No Go Thread Plug and Ring Gauge
- Master Gear and Spline Gauge
- METRO Digital Display Unit
- Thread Depth Gauge
- ORFEO Packer Measure Block
- TAMLOT Keyway Gauge
- Coating Thickness Gauge
- Metrology Casting Material
- Portable Hardness Tester
- Surface Roughness Tester
Bowers XT Analogue Bore Gauge - Metric / Inch
|
Bowers XT Analogue Bore Gauge - Metric / Inch |
Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement.
The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary.
Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
Features:
- Range 2-300mm (0.080''-12'')
- 2-6mm 2 point / 6-300mm 3 point measurement
- Graduation XTA Micro 2-6mm: 0.001mm, 6-20mm: 0.002mm
- Graduation XTA Micro 0.080”-1/4”: 0.0001”, 1/4”-3/4”: 0.0001”
- Graduation XTA 20-300mm: 0.005mm
- Tungsten carbide measuring faces on all 3-point heads from 12.5mm
- Blind bore measurement from 2mm-6mm and above 12.5mm (0.500'')
- Extensions available above 6mm for deep hole measurement
- Ratchet stop to ensure consistent measurement
- Setting rings included with individual instruments and sets
- UKAS certificates supplied as standard with all setting rings
- UKAS certificate supplied as standard with all XT mechanical gauges
- Serial number on all gauges
- Bore gauges manufactured according to DIN 863, part 4
- Supplied in fitted case
- Setting rings included with individual instruments and sets
- UKAS certificates supplied as standard with all setting rings and gauges
- Serial number on all digital readouts and measuring heads
- Heads with special anvils available to suit specific customer requirements (e.g. Threads, grooves, 2-point, spherical, splines etc)
- Bore gauges manufactured according to DIN 863, part 4
- Supplied in fitted wooden case
Available in Individual instrument or in complete set.
Individual Bore Gauge (Metric)
| Code No. | Range (mm) | Accuracy (mm) | Depth (mm) | Setting Ring (mm) |
| XTA1M | 2-2.5 | 0.004 | 9 | 2.5 |
| XTA2M | 2.5-3 | 0.004 | 9 | 2.5 |
| XTA3M | 3-4 | 0.004 | 12 | 4 |
| XTA4M | 4-5 | 0.004 | 18 | 4 |
| XTA5M | 5-6 | 0.004 | 18 | 5 |
| XTA6M | 6-8 | 0.004 | 58 | 8 |
| XTA8M | 8-10 | 0.004 | 58 | 8 |
| XTA10M | 10-12.5 | 0.004 | 58 | 12.5 |
| XTA12M | 12.5-16 | 0.004 | 62 | 12.5 |
| XTA16M | 16-20 | 0.004 | 62 | 20 |
| XTA20M | 20-25 | 0.004 | 66 | 20 |
| XTA25M | 25-35 | 0.004 | 66 | 35 |
| XTA35M | 35-50 | 0.004 | 80 | 35 |
| XTA50M | 50-65 | 0.005 | 80 | 65 |
| XTA65M | 65-80 | 0.005 | 80 | 65 |
| XTA80M | 80-100 | 0.005 | 100 | 80 |
| XTA100M | 100-125 | 0.006 | 115 | 125 |
| XTA125M | 125-150 | 0.006 | 115 | 125 |
| XTA150M | 150-175 | 0.007 | 115 | 175 |
| XTA175M | 175-200 | 0.007 | 115 | 175 |
| XTA200M | 200-225 | 0.008 | 118 | 225 |
| XTA225M | 225-250 | 0.008 | 118 | 225 |
| XTA250M | 250-275 | 0.009 | 118 | 275 |
| XTA275M | 275-300 | 0.009 | 118 | 275 |
Set (Metric)
| Code No. | Range (mm) | Measuring Head | Setting Ring |
| SXTA1M | 2-3 | 2 | 1 |
| SXTA2M | 3-6 | 3 | 2 |
| SXTA3M | 6-10 | 2 | 1 |
| SXTA4M | 10-20 | 3 | 2 |
| SXTA5M | 20-50 | 3 | 2 |
| SXTA6M | 50-100 | 3 | 2 |
| SXTA7M | 100-150 | 2 | 1 |
| SXTA8M | 150-200 | 2 | 1 |
Extensions
| Code No. | Length (mm) | Length (inch) | To Fit Heads (mm) | To Fit Heads (inch) |
| EGX0200 | 63 | 2.5 | 6 - 10 | 1/4 - 3/8 |
| EGX0400 | 76 | 3 | 10 - 12.5 | 3/8 - 1/2 |
| EGX0500 | 100 | 4 | 12.5 - 20 | 1/2 - 3/4 |
| EGX0001 | 150 | 6 | 20 - 50 | 3/4 - 2 |
| EGX0004 | 150 | 6 | 50 - 300 | 2 - 12 |